kn-copp-b-lpm manual

Kidde KN-COPP-B-LPM Carbon Monoxide Alarm Manual

This manual provides comprehensive information on the Kidde KN-COPP-B-LPM Carbon Monoxide Alarm with Digital Display. It covers installation‚ operation‚ maintenance‚ troubleshooting‚ safety precautions‚ technical specifications‚ warranty information‚ and contact information. This manual is also applicable to the Kidde KN-COB-B-LPM model.

Introduction

The Kidde KN-COPP-B-LPM Carbon Monoxide Alarm with Digital Display is an essential safety device designed to protect you and your family from the dangers of carbon monoxide (CO) poisoning. CO is a colorless‚ odorless‚ and tasteless gas that can be deadly. It is produced by the incomplete burning of fuels such as gas‚ oil‚ wood‚ and coal. CO can build up in your home from sources like malfunctioning furnaces‚ stoves‚ fireplaces‚ generators‚ and even cars left running in garages.

This alarm features a digital display that shows the current CO level in parts per million (PPM). It also includes a peak level memory function that stores the highest CO concentration measured since the last reset. The alarm’s test/reset button allows you to test the alarm’s functionality and silence the alarm if it is activated. A low battery signal alerts you when the batteries need to be replaced.

This manual provides detailed instructions on installing‚ operating‚ and maintaining your Kidde KN-COPP-B-LPM Carbon Monoxide Alarm. It also covers important safety precautions and troubleshooting tips. By carefully reading and following the instructions in this manual‚ you can ensure that your alarm is properly installed and functioning correctly‚ providing you with the peace of mind that comes with knowing that you and your family are protected from the silent threat of carbon monoxide poisoning.

Features

The Kidde KN-COPP-B-LPM Carbon Monoxide Alarm with Digital Display boasts an array of features designed to provide comprehensive protection against the silent threat of carbon monoxide poisoning. These features include⁚

• Digital Display⁚ The alarm features a digital display that shows the current CO level in parts per million (PPM). This allows you to monitor CO levels in your home and identify potential hazards before they become dangerous.
• Peak Level Memory⁚ The alarm stores the highest CO concentration measured since the last reset‚ providing valuable information about potential exposure to CO.
• Test/Reset Button⁚ This button allows you to test the alarm’s functionality and silence the alarm if it is activated. Regular testing ensures your alarm is working properly.
• Low Battery Signal⁚ The alarm includes a low battery signal that alerts you when the batteries need to be replaced. This ensures the alarm remains operational and provides continuous protection.
• Slide-Out Battery Door Cover⁚ The alarm’s slide-out battery door provides immediate access to the batteries for easy replacement.
• Battery Safeguard⁚ This feature makes it difficult to close the battery compartment without batteries installed‚ ensuring the alarm is always powered and functional.

These features combine to make the Kidde KN-COPP-B-LPM Carbon Monoxide Alarm a reliable and effective safety device for your home.

Installation

Proper installation of your Kidde KN-COPP-B-LPM Carbon Monoxide Alarm is crucial for its effectiveness. Here’s a step-by-step guide to ensure safe and correct installation⁚

1. Choose the Right Location⁚ Install the alarm in a central location on a wall‚ at least 15 feet from any potential sources of CO‚ such as fuel-burning appliances‚ fireplaces‚ or water heaters. Avoid installing it near areas where it could be exposed to extreme temperatures or humidity.
2. Mount the Alarm⁚ Use the included mounting screws and anchors to secure the alarm to the wall. Ensure the alarm is level and securely mounted.
3. Install Batteries⁚ Insert fresh alkaline batteries‚ ensuring they are correctly oriented according to the polarity markings inside the battery compartment.
4. Test the Alarm⁚ Once the batteries are installed‚ press and hold the Test/Reset button to activate the alarm. The alarm should sound‚ confirming it is operational.
5. Place Warning Flags⁚ After installation‚ place the red battery warning flags in the battery well‚ ensuring they are visible. These flags serve as a reminder to replace the batteries regularly.

After installation‚ your CO alarm will begin monitoring for CO. Always refer to the complete installation instructions included with your alarm for detailed information and specific guidance.

Operation

The Kidde KN-COPP-B-LPM Carbon Monoxide Alarm operates continuously to detect dangerous levels of carbon monoxide (CO) in your home. Its digital display provides real-time readings of CO levels‚ measured in parts per million (PPM)‚ allowing you to monitor the air quality in your environment. Here’s how it functions⁚

• CO Detection⁚ The alarm’s sensor constantly monitors the air for CO. When the CO concentration reaches a predetermined threshold‚ the alarm will sound.
• Digital Display⁚ The digital display shows the current CO level in PPM. It updates every 15 seconds‚ giving you a clear indication of any changes in CO levels.
• Peak Level Memory⁚ The alarm’s Peak Level Memory feature stores the highest CO concentration measured since the last reset‚ allowing you to track potential CO exposure over time.
• Test/Reset Button⁚ The Test/Reset button serves two purposes⁚
  
  • Testing⁚ Pressing and holding the button activates the alarm‚ allowing you to verify its functionality.
  • Resetting⁚ After an alarm‚ pressing the button silences the alarm and resets the Peak Level Memory.
• Low Battery Signal⁚ The alarm will emit a low battery signal (typically a blinking light or a beeping sound) to indicate that the batteries need to be replaced.

Remember to regularly test your alarm to ensure its proper operation and replace the batteries according to the manufacturer’s recommendations.

Maintenance

Regular maintenance ensures your Kidde KN-COPP-B-LPM Carbon Monoxide Alarm functions optimally and provides reliable protection. Here’s a comprehensive maintenance guide to keep your alarm in top condition⁚

• Monthly Testing⁚ Conduct a monthly test by pressing and holding the Test/Reset button until the alarm sounds. This verifies the alarm’s functionality and ensures it’s ready to detect CO.
• Battery Replacement⁚ Replace the batteries every year‚ regardless of whether the low battery signal has activated. Using fresh batteries ensures optimal performance and helps prevent unexpected alarm failures.
• Dust and Debris Removal⁚ Regularly clean the alarm’s sensor and housing with a soft‚ dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
• Visual Inspection⁚ Visually inspect the alarm for any damage‚ cracks‚ or signs of wear and tear. If you notice any issues‚ replace the alarm immediately.
• Environmental Considerations⁚ Avoid placing the alarm in areas prone to extreme temperatures‚ humidity‚ or direct sunlight. These conditions can affect the alarm’s performance.
• Professional Inspection⁚ It’s recommended to have your CO alarm professionally inspected every 5 years. A certified technician can ensure the alarm is functioning correctly and identify any potential issues.

By following these maintenance steps‚ you can ensure your Kidde KN-COPP-B-LPM Carbon Monoxide Alarm remains reliable and provides peace of mind for your family’s safety.

Troubleshooting

While the Kidde KN-COPP-B-LPM Carbon Monoxide Alarm is designed for reliable operation‚ occasional issues may arise. This troubleshooting guide helps address common problems and provides solutions to restore your alarm’s functionality⁚

• Alarm Sounding Continuously⁚ If the alarm sounds continuously‚ there’s likely a high concentration of carbon monoxide in the air. Evacuate the area immediately‚ open windows for ventilation‚ and contact your local emergency services.
• Alarm Sounding Intermittently⁚ If the alarm sounds intermittently‚ it could indicate a faulty sensor or a malfunctioning alarm. Check for dust or debris on the sensor and clean it if necessary. If the issue persists‚ replace the alarm.
• Alarm Not Sounding⁚ If the alarm fails to sound during a test or in the presence of CO‚ verify the batteries are installed correctly and have sufficient power. Check for any obstructions near the sensor that might impede its function. If the problem persists‚ replace the alarm.
• Low Battery Signal⁚ If the low battery signal is activated‚ replace the batteries immediately. Using fresh batteries ensures optimal performance and helps prevent unexpected alarm failures.
• Green Light Flashing⁚ A blinking green light indicates a power outage and that the alarm is not receiving the normal amount of power it requires to function optimally. This is a temporary condition‚ and the alarm will resume normal operation once power is restored.

If you’re unable to resolve the issue after following these troubleshooting steps‚ contact Kidde customer support for assistance.

Safety Precautions

The Kidde KN-COPP-B-LPM Carbon Monoxide Alarm is designed to protect you and your family from the dangers of carbon monoxide (CO). However‚ it’s crucial to follow these safety precautions to ensure optimal protection and prevent accidents⁚

• Installation in Suitable Locations⁚ Install the alarm in accordance with the instructions provided in this manual. Choose locations where CO is most likely to accumulate‚ such as near bedrooms‚ and avoid areas with high humidity or extreme temperatures.
• Regular Testing and Maintenance⁚ Test the alarm monthly to ensure it’s functioning correctly. Replace batteries as needed‚ and follow the recommended maintenance schedule provided in this manual;
• CO Awareness⁚ Be aware of the signs of CO poisoning‚ including headaches‚ dizziness‚ nausea‚ and fatigue. If you suspect CO poisoning‚ evacuate the area immediately‚ open windows for ventilation‚ and seek medical attention.
• Proper Ventilation⁚ Ensure adequate ventilation in your home‚ especially when using appliances that produce CO‚ such as gas stoves‚ furnaces‚ and water heaters. Regularly inspect and maintain these appliances to prevent CO leaks.
• CO Sources⁚ Be mindful of potential CO sources‚ including malfunctioning appliances‚ blocked chimneys‚ and operating vehicles in enclosed spaces. Take steps to address these potential hazards.
• Proper Installation⁚ Only install the alarm according to the instructions in this manual. Improper installation can compromise the alarm’s effectiveness.
• Avoid Tampering⁚ Do not tamper with or modify the alarm in any way. Any alterations can affect its performance and potentially compromise its safety.
• Fire Safety⁚ While the alarm is designed to detect CO‚ it is not a substitute for smoke detectors. Install and maintain smoke detectors in your home according to local building codes and fire safety guidelines.

By taking these precautions‚ you can significantly reduce the risk of CO poisoning and ensure the safety of yourself and your family.

Technical Specifications

The Kidde KN-COPP-B-LPM Carbon Monoxide Alarm with Digital Display incorporates advanced features and specifications designed to provide reliable and accurate CO detection. Here are the key technical aspects of the alarm⁚

• Detection Technology⁚ The alarm utilizes an electrochemical sensor to detect CO. This sensor is highly sensitive and provides accurate readings‚ even at low CO concentrations.
• Detection Range⁚ The alarm can detect CO levels ranging from 11 to 999 PPM (parts per million). It features a Peak Level Memory function that stores the highest CO concentration measured since the last reset.
• Alarm Response Time⁚ The alarm is designed to respond quickly to CO levels above the threshold. It will sound a loud‚ distinct alarm to alert occupants of a potential CO hazard.
• Digital Display⁚ The KN-COPP-B-LPM model features a digital display that provides real-time CO readings in PPM. The display updates every 15 seconds‚ allowing you to monitor CO levels and identify any fluctuations.
• Low Battery Signal⁚ The alarm includes a low battery signal that alerts you when the batteries need replacement. Replacing batteries promptly ensures the alarm remains functional and provides continuous protection.
• Test/Reset Button⁚ The alarm has a Test/Reset button that allows you to test the alarm circuit and silence the alarm after it has been activated.
• Power Source⁚ The alarm operates on battery power‚ ensuring continuous monitoring even during power outages. The recommended battery type is a 9-volt alkaline battery.
• Operating Temperature Range⁚ The alarm operates effectively within a temperature range of 32°F to 100°F (0°C to 38°C).
• Operating Humidity Range⁚ The alarm can function properly within a humidity range of 0% to 95% non-condensing.
• Dimensions⁚ The alarm measures approximately 4.75 inches in diameter and 1.75 inches in height.
• Weight⁚ The alarm weighs approximately 0.5 pounds.

Understanding these technical specifications is essential for proper installation‚ operation‚ and maintenance of the Kidde KN-COPP-B-LPM Carbon Monoxide Alarm.

Warranty Information

Kidde stands behind the quality and reliability of its products‚ including the KN-COPP-B-LPM Carbon Monoxide Alarm. The alarm comes with a limited warranty that protects you against defects in materials and workmanship. This warranty is valid for a period of 10 years from the date of original purchase.

Under this warranty‚ Kidde agrees to repair or replace‚ at its discretion‚ any defective alarm. To obtain warranty service‚ you must contact Kidde Customer Service. You will need to provide proof of purchase‚ such as a receipt or sales invoice. The warranty covers the alarm itself‚ but it does not cover any consequential damages or incidental expenses‚ such as damage to property or personal injury resulting from a malfunctioning alarm.

The warranty does not cover damage caused by misuse‚ abuse‚ neglect‚ improper installation‚ or unauthorized modifications. It also does not cover damage resulting from natural disasters‚ such as floods‚ earthquakes‚ or lightning strikes. It is important to follow the instructions in this manual to ensure proper installation and operation of the alarm to maximize its lifespan and ensure that it functions correctly.

To obtain warranty service‚ you can contact Kidde Customer Service by phone‚ email‚ or mail. Their contact information is provided in the “Contact Information” section of this manual.