lippert slide out adjustment manual

Lippert Slide Out Adjustment Manual⁚ A Comprehensive Guide

This guide provides a comprehensive overview of Lippert slide-out systems, covering their operation, adjustment, and troubleshooting. It’s designed to help RV owners understand and maintain their slide-outs, ensuring smooth and reliable operation.

Introduction

Lippert Components (LCI) is a leading manufacturer of RV slide-out systems, known for their durability, reliability, and innovative features. These systems are essential for maximizing space in RVs, providing additional living area, storage, or sleeping accommodations. However, like any mechanical system, Lippert slide-outs require proper maintenance and adjustments to ensure smooth operation and prevent potential problems. This comprehensive manual aims to provide RV owners with the knowledge and guidance needed to understand, adjust, and troubleshoot their Lippert slide-out systems.

Understanding Lippert Slide-Out Systems

Lippert slide-out systems are designed to extend and retract sections of an RV’s living space, providing additional room for sleeping, dining, or storage. These systems typically consist of a slide-out room, a track and guide system, an actuator (either electric or hydraulic), and a control system. The slide-out room is a section of the RV’s interior that can be extended outwards on rollers or tracks. The track and guide system ensures smooth and controlled movement of the slide-out room, while the actuator provides the power to extend and retract it. The control system allows the user to operate the slide-out system, typically via switches or buttons. Lippert slide-out systems are known for their robust construction, featuring high-quality materials and components that are built to withstand the rigors of RV travel.

Types of Lippert Slide-Out Systems

Lippert offers a range of slide-out systems to suit different RV designs and needs. These systems can be categorized based on their placement and the type of actuator used. The most common types are⁚

• Above Floor Slide-Out Systems⁚ These systems are mounted above the floor, typically on rails that run along the sides of the RV. This design allows for a more spacious interior and a flush floor when the slide-out is retracted.
• Through Frame Slide-Out Systems⁚ These systems are mounted through the RV’s frame, with the track and guide system running along the outside of the frame. This design is often favored for its structural integrity and ease of installation.
• Hydraulic Slide-Out Systems⁚ These systems use a hydraulic cylinder to extend and retract the slide-out room. Hydraulic systems are known for their powerful operation and smooth movement.

Each type of Lippert slide-out system has its own advantages and disadvantages, and the best choice for your RV will depend on your specific needs and preferences.

Above Floor Slide-Out Systems

Lippert’s Above Floor Slide-Out systems offer a modern and stylish approach to maximizing RV living space. They utilize a rack and pinion design with a bi-directional electric motor to extend and retract the slide-out room. The system features a built-in automatic braking system for safety and smooth operation.

Lippert Above Floor Slide-Out systems come in both single and double rail configurations, providing flexibility for different RV layouts. They are also available with vertical motor options for added versatility and ease of installation;

These systems are renowned for their sleek, flush-floor design, offering a seamless and spacious interior experience.

Through Frame Slide-Out Systems

Lippert Through Frame Slide-Out systems are designed for seamless integration with the RV’s frame structure. They utilize a rack and pinion guide system, powered by an electric ball screw actuator. The motor drives the ball screw in a forward and backward motion, extending and retracting the slide-out room smoothly and efficiently.

These systems are known for their durability and strength, providing reliable operation even in challenging conditions. The actuator comes equipped with an automatic clutching system, ensuring safe and controlled movement. Lippert Through Frame Slide-Out systems offer a robust and reliable solution for expanding RV living space.

Hydraulic Slide-Out Systems

Lippert Hydraulic Slide-Out systems offer a powerful and smooth operation, utilizing a hydraulic cylinder to move the slide-out room. The power unit drives the cylinder rod in a forward and backward motion, extending and retracting the room with precision. These systems are known for their robust construction and ability to handle heavy slide-out rooms.

Lippert Hydraulic Slide-Out systems are designed to operate as a negative ground system. They require the use of automatic transmission fluid (ATF) for optimal performance. The system should be filled to within 1/2 inch of the top when all slide-outs are fully retracted, ensuring proper lubrication and hydraulic pressure.

Lippert Slide-Out Adjustment Manual⁚ Key Components

Lippert slide-out systems rely on several critical components for their smooth operation. Understanding these components is essential for effective troubleshooting and adjustment. These components include⁚

• Electric Motor⁚ This component provides the power to extend and retract the slide-out room; It’s typically a bi-directional motor, allowing movement in both directions. The motor may be located within the slide-out room or within the RV’s chassis, depending on the system’s design.
• Gear Rack and Pinion⁚ This mechanism converts the motor’s rotational motion into linear movement, driving the slide-out room in and out. The gear rack is attached to the slide-out room, while the pinion is connected to the motor’s drive shaft.
• Slide-Out Room⁚ This is the structure that houses the additional living space within the RV. It’s designed to move smoothly on the slide-out tracks and rollers.
• Slide-Out Tracks and Rollers⁚ These components provide a smooth and stable surface for the slide-out room to travel on. They are typically made of durable materials like steel or aluminum, ensuring longevity and reliability.

Manual Override

A manual override system is a vital safety feature on Lippert slide-outs, providing a backup method for extending or retracting the room in case of electrical failure or other malfunctions. This system typically involves a hand crank or lever that engages with the slide-out’s drive mechanism. The manual override is usually located in a readily accessible location, such as near the slide-out motor or inside the RV’s storage compartment. Engaging the manual override requires a bit of physical effort, but it ensures that the slide-out room can be safely moved even without power.

It is crucial to understand how to use the manual override system correctly, as improper operation could damage the slide-out mechanism. Refer to the Lippert slide-out owner’s manual for detailed instructions on engaging and disengaging the manual override.

Floor Rollers

Floor rollers are essential components of Lippert slide-out systems, playing a crucial role in supporting the weight of the slide-out room as it extends and retracts. These rollers are mounted on the underside of the slide-out room and ride on tracks installed on the RV’s chassis. They provide smooth and controlled movement, ensuring that the slide-out glides in and out effortlessly. The quality and condition of floor rollers directly impact the slide-out’s performance and longevity.

Lippert recommends using only approved floor rollers for their slide-out systems, as these rollers are specifically designed to meet the system’s weight capacity and operational requirements. Regular inspection and lubrication of floor rollers are essential for maintaining their smooth operation and preventing premature wear. If you notice any signs of damage or excessive wear on your floor rollers, it’s important to replace them promptly to avoid potential problems with your slide-out system.

Troubleshooting Common Lippert Slide-Out Issues

Lippert slide-out systems are generally reliable, but like any mechanical system, they can experience occasional issues. Understanding common problems and their potential causes can help you diagnose and resolve them effectively. One frequent issue is slide-out room sticking or binding. This can occur due to misalignment, worn floor rollers, or debris accumulating on the tracks. Another common problem is the slide-out not extending or retracting fully. This could be caused by a malfunctioning motor, a problem with the drive shaft, or a faulty electrical connection.

Additionally, you might encounter a slide-out room that makes unusual noises during operation. This could indicate worn bearings, loose components, or misalignment. If you notice any of these issues, it’s essential to address them promptly to avoid further damage and ensure the safe and proper functioning of your slide-out system. Consult your Lippert slide-out manual for detailed troubleshooting steps and recommendations for resolving specific problems.

Adjusting Lippert Slide-Out Systems

Adjusting Lippert slide-out systems is a crucial aspect of maintaining their proper operation. These adjustments are typically required to ensure the slide-out room moves smoothly and aligns correctly with the RV’s frame. Lippert slide-out systems often have adjustment mechanisms for both vertical and horizontal alignment. Vertical adjustments are typically made using the floor rollers, which support the slide-out room’s weight; Horizontal adjustments are usually made by adjusting the slide-out tracks or the motor mounting bracket.

When performing any adjustments, it’s essential to follow the instructions provided in your Lippert slide-out manual carefully. Incorrect adjustments can lead to further problems and even damage the system. If you’re not comfortable making adjustments yourself, it’s always recommended to consult a qualified RV technician. Regularly inspecting and adjusting your Lippert slide-out system will ensure smooth operation and prevent potential issues.

Vertical and Horizontal Room Adjustment

Lippert slide-out systems often require adjustments to ensure proper alignment and smooth operation. Vertical adjustments address the height of the slide-out room, while horizontal adjustments focus on its side-to-side positioning. Vertical adjustments are typically made by adjusting the floor rollers, which support the slide-out room’s weight. These rollers can be raised or lowered to fine-tune the vertical alignment. Horizontal adjustments are usually made by adjusting the slide-out tracks or the motor mounting bracket.

Adjusting the tracks involves loosening the track bolts and repositioning the tracks to achieve the desired alignment. Adjusting the motor mounting bracket involves loosening the bracket bolts and repositioning the bracket to ensure the slide-out room extends and retracts smoothly. It’s essential to follow the instructions in your Lippert slide-out manual carefully when making these adjustments, as incorrect adjustments can lead to further problems and even damage the system.

Safety Precautions

Working with Lippert slide-out systems requires careful attention to safety. Before attempting any adjustments or repairs, ensure the slide-out room is fully retracted and secured. Disconnect the power supply to the slide-out system to prevent accidental activation. Use appropriate lifting equipment and safety gear when working on heavy components. Never attempt to adjust or repair the system while it is in motion. Always follow the instructions in your Lippert slide-out manual and consult a qualified technician if you are unsure about any procedure.

Remember, incorrect adjustments or repairs can lead to serious injury or damage to the slide-out system. Take your time, work carefully, and prioritize safety throughout the entire process.

Lippert Resources and Support

Lippert Components (LCI) offers a wealth of resources and support for RV owners who need information about their slide-out systems. The Lippert website is a valuable resource, providing access to owner’s manuals, installation guides, technical bulletins, and product specifications. You can also find helpful videos demonstrating proper operation and maintenance procedures.

For direct assistance, Lippert’s customer service team is available by phone or email. They can help answer questions, troubleshoot issues, and provide guidance on parts and repairs. In addition to their website and customer service, Lippert often collaborates with RV dealers and repair shops to provide training and support for technicians who work on their slide-out systems.

Lippert Website

The Lippert website is a central hub for information about their slide-out systems. It offers a comprehensive library of resources, including owner’s manuals, installation guides, and technical bulletins. These documents provide detailed instructions on the operation, maintenance, and troubleshooting of Lippert slide-outs. The website also features a searchable database of product specifications, allowing RV owners to identify the specific components used in their slide-out system.

In addition to written materials, the Lippert website offers a collection of informative videos. These videos demonstrate proper operation procedures, maintenance tasks, and common troubleshooting steps. The website also provides links to authorized dealers and repair shops, making it easy for RV owners to find qualified professionals for assistance with their slide-out systems.

Lippert Customer Service

Lippert Components provides dedicated customer service support for their slide-out systems. They offer assistance with a wide range of issues, including troubleshooting, parts ordering, and warranty claims. Their customer service representatives are knowledgeable about Lippert products and can provide guidance on proper operation, maintenance, and repair procedures.

Lippert offers various contact methods for customer service, including phone, email, and online forms. Their website provides a dedicated customer service page with contact information and frequently asked questions; Lippert strives to provide prompt and helpful support, ensuring that RV owners have access to the resources they need to maintain and repair their slide-out systems.